The Fastest Way To Remove Dust- Pulse Dust Collector

The pulse dust collector is a part of the dry mortar production line. Whether the pulse dust collector can run smoothly is related to the working efficiency of the dry mortar production line. If the pulse dust collector does not work smoothly, a large amount of dust will be generated. It damages the health of workers and causes environmental pollution.

After a set of dry mix mortar plant is built, with the continuous increase of dry mortar output and the extension of running time, more and more dust will accumulate on the filter bag of the pulse dust collector, so the resistance of the pulse dust collector will also increase.When the resistance of the pulse dust collector rises to the set value, the wear of the pulse dust collector will become more and more serious when used. At this time, the bag pulse dust collector starts to automatically clean the dust.

　　1. Gas cleaning dust: It uses high-pressure gas or external atmosphere to blow the filter bag back to blow off the dust on the filter bag.
　　2. Clean dust with regular mechanical vibration: The filter bag is regularly vibrated with the help of a mechanical vibration device to remove the dust on the filter bag.
　　3. Manual tapping of the filter bag: tap each filter bag manually to remove the dust on the filter bag.

Generally speaking, there are three methods for cleaning dust. Another advantage of a bag-type pulse dust collector is that it is easy to repair, and it is easier to replace the bag.
The collected dust will fall into the hopper and be discharged by the ash unloading device. With the discharge of dust, a cleaning process is completed.

Di Hai brand dust collector devices are divided into economical type-bag filter, high efficiency-pulse dust collector, you can choose the type of dust collector according to your degree of dust collection. You are welcome to consult at any time.

MC-22 pulse dust collector is a new type of high-efficiency pulse dust collector improved on the basis of bag filter.

Remove the dust attached to the filter medium (bag or filter cartridge) by blowing compressed air; depending on the size of the dust collector, there may be several sets ofpulse valves, controlled by a pulse controller or PLC, each time opening a set of pulse valves Remove the dust of the part of the bag or filter cartridge thatit controls, and the other bags or filter cartridges work normally.After a period of time, the next set of pulse valves opens, and the next part of the dust collector is cleaned by the ash hopper, the upper box,The body, the lower case and the like are composed of parts, and the upper, middle and lower boxes are divided into compartment structures.

Equipment size: 1040x700x3460mm
Air volume: 2664-5268m3/h
Dust bag number: 12 bags
Power: 3kw
Single filter filtration area: 0.54 square meters

1. If a pulse is found to be inoperative (that is no sound), check the pulse solenoid valve.Check if the solenoid coil light is on.If the coil is not replaced properly, the solenoid valve needs to be replaced.
2. If there is a pulse leak, you need to check if the solenoid valve is blocked.If the electromagnetic is not blocked, you need to replace the solenoid valve.
3. Managers should be familiar with the principle, performance and use conditions of the dust collector, and master the adjustment of operating parameters and equipment maintenance methods.
4. Regularly replenish the lubricating parts on the equipment.
5. Always check whether the dust cleaning system of the dust collector is normally blown.
6. If the pulse valve fails, it should be removed in time. If there are foreign substances such as impurities and moisture inside, it should be cleaned up in time, and the diaphragm should be replaced in time.
7. Regularly measure process parameters, such as gas volume, temperature, concentration, etc., find abnormalities, should find the cause and deal with it in time.
8. Check the operation of the equipment regularly according to the fluctuation of the running resistance of the equipment.
9. The filter bag is a wearing part. The user should regularly check the working condition of the filter bag and consider changing it according to the damage degree of the filter bag.
10. Regularly check the working condition of the pneumatic system and the ash discharge system, and find out that the abnormality is eliminated in time.
11. According to the water separator in the compressed air system, the water is discharged regularly.
12. When stopping, after the process system is stopped, the dust collector and exhaust fan should be kept working for a period of time to remove moisture and dust from the equipment. At the same time, the dust cleaning and ash discharging operations must be repeated before the dust collector stops working.

Using sub-chamber air-stop pulse blowing cleaning technology, strong cleaning ability, high dust removal efficiency, low emission concentration, low air leakage rate, low energy consumption, low steel consumption, less floorspace, stable and reliable operation, good economic benefits.

At the same time, the fatigue degree of the filter bag and the pulse valve is correspondingly reduced, thereby multiplying the life of the filter bag and the valve piece.

Inspection and change of bags can be carried out in the system without stopping the system fan, the system under normal operating conditions.