dry mix mortar plant

Delivery Dry Mix Mortar Plant To Tunisia

Thu, 03 Nov 2022 00:03:16 -0700

A small dry mix mortar plant will delivery to Tunisia today.

See the following picture of delivery site.

Concrete Batch Control Systems

Tue, 13 Apr 2021 02:27:32 -0700

Concrete batching plant is a kind of construction machinery that is widely used in the construction industry.
Concrete batch control systems usually adopt a control mode of relay loops and smart meters.
In the concrete formula of the actual production process, the supply of each ingredient and each link，all the time control needs to be realized by the operator through the observation of the instrument.
This kind of control system with low degree of automation and poor reliability is increasingly unable to meet the needs of the construction industry.

Because the working environment of the concrete mixing plant is very harsh, the relay control system of the traditional concrete mixing plant is prone to failure in the actual production process, the relay circuit is very complicated, and the equipment is also very difficult to repair and maintain.

For the HZS60 concrete mixing plant, the design framework of using the upper computer and the lower computer in the automatic control system of the concrete mixing plant is proposed.
Using this control system, the operator can accurately control and master the entire actual production process through the operation of the host computer.
At the same time, by calling various reports of the host computer, it is convenient to count and query the production volume and material consumption within a certain period of time. Information such as the situation and customer conditions. The use of this design has greatly improved the production automation of the mixing plant and the safety and reliability of the work.

1. HZS60 concrete mixing plant process requirements

The control system of the HZS60 concrete batching plant is specifically designed for the maximum production mode of the 60 concrete mixing plant.
It uses sand silo, coarse stone silo, fine stone silo, cement silo, powder additive silo, aggregate scale, and powder scale，external additive scale, water scale, a...Read More

How To Choose The Right Sand Dryer Machine?

Thu, 18 Mar 2021 01:18:03 -0700

Sand is a common raw material, and its important role can often be seen in construction machinery and mining machinery. Generally speaking, the water content of river sand is very large. In order to improve your capacity, natural drying is not acceptable, so how do choose a high quality with competition price sand dryer?

There are many sand dryer machine manufacturers in Zhengzhou, China. Choosing a reliable sand dryer machine supplier may not be easy for you. I have more than 15 years of experience in the manufacture of sand dryers machines. I will give you some reasonable suggestions based on my experience and the problems encountered during the operation of the sand dryer machine. I hope it will be helpful to you.

1. What are the classifications of sand dryers machine?

Generally speaking, sand dryers machine have long-type sand dryer and high efficiency sand dryers. Unless you have special needs, we recommend that you choose a high efficiency sand dryer, which is what we usually call a three cylinder rotary dryer. There are too many advantages to talk about. The main advantage is that it occupies less space and is highly efficient. The three cylinder rotary dryer has more than 20 drying chambers, which can quickly dry the sand and make the water content of the sand less than 5%.

2. The operating principle of the sand dryer machine

The sand is conveyed by the feeder to the inner layer of the sand dryer machine. The sand dryer rotates continuously under the power device. The flowing sand will enter the middle and outermost drying chambers, and the dried sand will be conveyed out by the hot air, then falls on the belt conveyor, and is conveyed to the destination by the belt conveyor.

3. What models of sand dryers are available?

The main models of the three cylinder rotary sand dryer are: DH6215, DH6220, DH6230, DH6240, DH6250, DH6260.

Here are the 3 most common questions to help you...Read More

Delivery Dry Mix Mortar Plant To Yemen

Wed, 17 Mar 2021 02:27:01 -0700

The dry mix mortar machine was sent to the scene in Yemen

Dry Mix Mortar Plant Send To Chile

Fri, 12 Mar 2021 01:28:01 -0800

Congratulations! A dry mix mortar plant will be sent to Chile. We are the dry mix mortar plant manufacturer in China, which can produce 1-30 ton per hour dry mixer mortar plant. There are simple production lines and fully automatic production lines.

Please see the pictures of dry mix mortar machines and packed machines that have been prepared:

Chile is located in South America. It is close to the Pacific Ocean to the west and south. It has 15 major ports and is very convenient for land and sea transportation. If you want to know more about importing dry mix mortar plant to Chile from China, please contact us.

What Kind Of Fuel Is Good For The Sand Dryer?

Wed, 13 Jan 2021 01:53:52 -0800

Our three-cylinder sand dryer supports three fuels: natural gas, coal, and biomass fuel. You can choose the fuel according to your local actual situation. Which fuel is better for the dryer? Or which fuel cost is lower?

Then I will take you to analyze the three commonly used fuels:

1. Coal

For the current society, the burning of coal is not environmentally friendly, and the country's control of coal-burning is becoming more and more stringent.

When working, it is easy to be heated unevenly, and the combustion cannot be stopped in time, resulting in a waste of heat. But coal is the most widely used in actual work.

Generally, coal has a calorific value of 5,000 kcal/kg, which is cost-effective. As people's awareness of environmental protection is getting higher and higher, the prospect of coal is not optimistic.

Coal is divided into bituminous coal and anthracite, and most sand drying machines choose anthracite. During operation, dust removal and waste gas treatment are required.

Main features: not environmentally friendly, but cost-effective.

2. Biomass fuel

Biomass fuel is a new type of environmentally friendly fuel. It is a renewable resource with a variety of products that can provide heat and power generation.

Biomass fuel is mainly compressed from wood chips and straw particles. Used as fuel for sand dryer. Compared with coal, the cost of biomass fuel is higher.

Main features: Environmentally-friendly new resources, limited by wood chips resources, production capacity may not be reached.

3. Natural gas

Everyone is familiar with natural gas. In our daily life, we use natural gas for cooking, which has high safety performance.

Generally, the calorific value of natural gas is about 8500k/kg, and combustion efficiency is high. There is less air pollution, and the overall cost...Read More

How To Maintain Dry Mortar Plant?

Fri, 13 Nov 2020 00:56:39 -0800

The emergence of dry mortar plant has saved labor and improved the work efficiency of workers. The automation of the whole dry mortar production line has also become higher and higher.

The mixing system and weighing system of the dry mortar production line has reached 100% accuracy after years of testing and improvement. As you know, this is a mechanical device, not anything else.

It cannot maintain its best condition for a long time, you need to take care of it and take care of it. Check it in time.

In many dry mix mortar manufacturing process, the purity of the finished product is also very important. After each use, the dry mortar mixer must be thoroughly cleaned. In order to meet this condition, the inside of the dry mortar mixer should be kept smooth. The surface of our dry mixer machine is polished so that it is easy to clean.

Therefore, how should the dry mortar production line be maintained?

You need to remove the residual materials in the dry mortar mixer in time to make the sensor return to zero normally.
Check whether the lubricating oil is sufficient, and the lubricator in the air circuit system should maintain a sufficient amount of oil.
Check whether the motor and reducer are overheated, whether there is noise, whether the indicator is normal, and whether the signal system is intact.
Ensure that the dry mortar machine and the surrounding environment are clean.
Frequently check whether the cylinder, butterfly valve and solenoid valve are normal, please start and shut down the dry mortar machine correctly.
The mixer and discharge hopper should be cleaned every four hours to avoid solidification of residual...Read More

The Fastest Way To Remove Dust- Pulse Dust Collector

Wed, 11 Nov 2020 02:12:52 -0800

The pulse dust collector is a part of the dry mortar production line. Whether the pulse dust collector can run smoothly is related to the working efficiency of the dry mortar production line. If the pulse dust collector does not work smoothly, a large amount of dust will be generated. It damages the health of workers and causes environmental pollution.

Here, I will organize an article for you on the method of the pulse dust collector to quickly remove dust:

After a set of dry mix mortar plant is built, with the continuous increase of dry mortar output and the extension of running time, more and more dust will accumulate on the filter bag of the pulse dust collector, so the resistance of the pulse dust collector will also increase.When the resistance of the pulse dust collector rises to the set value, the wear of the pulse dust collector will become more and more serious when used. At this time, the bag pulse dust collector starts to automatically clean the dust.

　　1. Gas cleaning dust: It uses high-pressure gas or external atmosphere to blow the filter bag back to blow off the dust on the filter bag.
　　2. Clean dust with regular mechanical vibration: The filter bag is regularly vibrated with the help of a mechanical vibration device to remove the dust on the filter bag.
　　3. Manual tapping of the filter bag: tap each filter bag manually to remove the dust on the filter bag.

Generally speaking, there are three methods for cleaning dust. Another advantage of a bag-type pulse dust collector is that it is easy to repair, and it is easier to replace the bag.
The collected dust will fall into the hopper and be discharged by the ash unloading device. With the discharge of dust, a cleaning process is completed.

Di Hai brand dust collector devices...Read More

Dry Mortar Plant Delivery To Cote d'lvoire

Thu, 27 Aug 2020 23:24:26 -0700

Today is a happy day!

We shipped it today!

The dry mix mortar plant equipment will soon be shipped to Côte d’Ivoire by sea.

Today is a small dry mortar production line equipment. But it symbolizes the beginning of our cooperation.

I really like this customer, very handsome, generous, and decisive in decision-making.

We only communicated for a day, you heard it right, it was really a day of communication on WhatsApp, half a day to be precise.

In half a day, the client decided on the dry mix mortar production line plan, and the next day he made the payment without any attempt to bargain.

Do you know why this is?

Of course it is because we have a professional engineer and design team.

Our engineers and customers communicate directly on WhatsApp, and provide specific dry mortar plant solutions based on customer needs and actual conditions.

Then communicate with our designer, and let the designer design 3D drawings based on the engineer's dry mortar production line solution for customer reference.

All items are clear at a glance.

Don't ask me why our engineers are so good.

Dry mortar production line equipment is not suitable for wholesale sales. Each set of dry mortar plant needs to develop a special solution according to customer needs and actual conditions.

Our company also requires that every engineer's success needs to pass strict assessments.

Engineers need to learn and pass the assessment on the production line of dry mortar plant.
Engineers need to learn and pass the assessment at the production site of dry mortar plant.
Engineers need to be able to install dry mortar production line independently.

The strict company charter has made an excellent engineer. We are...Read More

The Difference Between Dry Mortar Mixing Plant And Concrete Mixing Plant

Wed, 26 Aug 2020 02:11:04 -0700

If you are a newcomer, you might think that the dry mortar plant is the same as the concrete mixing plant, because from the picture, they are indeed very similar. Their components are cement silo, mixer machine, screw conveyor and so on.

The structure is basically the same as the construction form of the station. Therefore, many people think that the dry mortar plant and the concrete mixing plant are the same, and even can be used universally, but in terms of actual conditions, the difference between the two is still very great. Lets’s analyze the difference and connection between dry mortar mixing plant and concrete mixing plant.

From the point of view of the process flow, the dry mortar mixing plant and the concrete mixing plant are composed of several tanks, batching systems, mixers, several packaging machines and some supporting equipment. The structure of the mixing system is a tower structure. It is basically difficult to see the difference between the two from the appearance.

If you just look at the difference between the two from the appearance, you are wrong. Their respective mixing systems are different, and each set of solutions is also very different.

Dry mortar technology is based on engineering thermodynamics, powder mechanics, fluid mechanics, structural mechanics, and material mechanics.

The design of the dry mortar mixing plant needs to combine these mechanical foundations, combined with corresponding experimental data, combined with modern high-speed development of computer technology, and use similar principles to establish corresponding mathematical models.

In China, the application of dry mortar plants is less than that of concrete mixing plants. Most factories simply apply them to dry mortar mixing plants on the basis of concrete machinery. There are too little research and experimental work done in the early stage, just simple equipment manufacturing.

The research investment is very small, and...Read More